PPG INDUSTRIES INC COATINGS & RESINS GROUP -- 90-474 PITT-TECH SATIN -- 8010-00F041220 
=====================  Product Identification  =====================

Product ID:90-474 PITT-TECH SATIN
MSDS Date:01/19/1993
FSC:8010
NIIN:00F041220
=== Responsible Party ===
Company Name:PPG INDUSTRIES INC COATINGS & RESINS GROUP
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101-5000
Country:US
Info Phone Num:412-492-5555/216-572-6111
Emergency Phone Num:304-843-1300/412-492-5555
CAGE:DO542
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC. COATINGS & RESINS GP
Address:4325 ROSEANNA DR PO BOX 9
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Phone:412-492-5555
CAGE:DO542

=============  Composition/Information on Ingredients  =============

Ingred Name:TITANIUM DIOXIDE, TIO2 (SUSPECTED ANIMAL CARCINOGEN, IARC
    GROUP 3) *95-2*
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 15-20%
OSHA PEL:10 MG/CUM
ACGIH TLV:10 MG/CUM (DUST)

Ingred Name:TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
    SILICATE
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 5-10%
OSHA PEL:2 MG/CUM
ACGIH TLV:2 MG/CUM (RESP DUST)

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 37-45%

Ingred Name:2-(2-BUTOXYETHYOXY)-ETHANOL, DIETHYLENE GLYCOL MONOBUTYL
    ETHER (BUTYL CARBITOL)
CAS:112-34-5
RTECS #:KJ9100000
Fraction by Wt: 5-10%

Ingred Name:DIETHYLENE GLYCOL METHYL ETHER, 2-(2-METHOXYETHOXY) ETHANOL
    METHYL CARBITOL
CAS:111-77-3
RTECS #:KL6125000
Fraction by Wt: 1-2%

Ingred Name:FILM FORMERS, RESINS, AND ADDITIVES (PROPRIETARY)
Fraction by Wt: 25-30%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES:
    IRRITANT. SKIN: SLIGHT IRRITANT. MAY BE ABSORBED THROUGH THE SKIN.
    INHALATION: VAPOR & SPRAY MIST MAY BE HARMFUL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, ITCHING, BURNING
    SENSATION, VISUAL DISTURBANCES, DRYNESS/CRACKING OF SKIN, BURNING,
    SWELLING

=======================  First Aid Measures  =======================

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
    W/PLENTY OF WATER FOR 15 MINS. SKIN: FLUSH W/PLENTY OF WATER,
    FOLLOWED BY WASHING W/SOAP & WATER. INHALATION: REMOVE TO FRESH
    AIR. APPLY CPR &  OTHER SUPPORTIVE MEASURES AS REQUIRED.OBTAIN
    MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:138.9F
Extinguishing Media:CO2, DRY CHEMICAL/UNIVERSAL AQUEOUS FILM FORMING
    FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, BUT MAY BE
    USED TO COOL CLOSED CONTAINERS WHEN EXPOSED TO EXTREME HEAT. IF
    WATER IS USED, FOG NOZZLES ARE PREFERED. WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE/BURST (DUE
    TO THE BUILDUP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE VENTILATION. ONLY PERSONNEL W/PROPER
    RESPIRATORY & SKIN & EYE PROTECTION SHOULD BE PERMITTED IN THE
    AREA. REMOVE ALL IGNITION SOURCES. TAKE UP MATERIAL W/SAWDUST,
    VERMICULITE/OTHER ABSORBENT M ATERIAL & PLACE INTO CONTAINERS FOR
    DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF
    COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHERE VENTILATION IS INADEQUARE, USE A SUITABLE
    RESPIRATOR.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST IN VOLUME & PATTERN TO KEEP
    THE CONCENTRATION OF INGREDIENTS BELOW EXPOSURE LIMITS.
Protective Gloves:NITRILE, NEOPRENE/LATEX
Eye Protection:CHEMICAL TYPE SPLASH GOGGLES
Work Hygienic Practices:REMOVE/LAUNDER/DISCARD CONTAMINATED CLOTHING &
    SHOES BEFORE REUSE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:86-474.8F
Vapor Pres:18.5
Vapor Density:>1
Spec Gravity:1.23
Evaporation Rate & Reference:(BU O AC=100): 35
Solubility in Water:62.6%
Appearance and Odor:VISCOUS LIQUID W/A CHARACTERISTIC ODOR
Percent Volatiles by Volume:61.6

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS
Stability Condition to Avoid:FREEZING, EXTREME HEAT & OTHER IGNITION
    SOURCES
Hazardous Decomposition Products:CO, OXIDES OF NITROGEN

====================  Disposal Considerations  ====================

Waste Disposal Methods:EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
    THROUGH AN APPROVED WASTE MANAGEMENT FACILITY. DISPOSE OF IN
    ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.